Rockchip RK3576 All-in-One Edge Solution

The RK3576 AI computing box is composed of RK3576 SBC and a metal case.

RK3576 Motherboard Introduction

● The RK3576 motherboard can used for display, control, network transmission, file storage, edge computing and other scenarios.

● Using Rockchip RK3576 as the main chip, the main frequency can reach up to 2.2GHz, integrating quad-core 642-bit Cortex-A72 and quad-core 64-bit Cortex-A53, a total of eight-core processors and ARM Mail-G52 MC3GPU, supporting 8K video decoding and 4K display output, super image processing capabilities, supporting multi-camera input, supporting multi-screen display, built-in independent NPU, enabling various AI scenarios.

● Unlock AI potential at the edge – 6TOPS NPU enables complex models without cloud dependency

● Highly Integrated Edge Computer with Rich Interfaces:

✔ 6x USB (3.0+2.0) ✔ Dual MIPI ✔ Mini PCIe

✔ Raspberry Pi 40-pin ✔ SIM/TF Card Support

✔ Gigabit LAN + Industrial RS485

● It officially supports mainstream Android, Debain, and Ubuntu operating system images, and can be applied to more than 8 different application environments.

● It is completely open source, provides official tutorials, and provides complete SDK driver development kits, design schematics and other resources, which can be easily used.

RK3576 Board Hardware configuration

● Power interface: 5V@4A DC input, Type-C interface (no data transmission capability)

● Main chip: RK3576 (quad-core A72 + quad-core A53, Mali-G52 MC3, 6T computing power)

● Memory: 2/4/8GB, LPDDR4X (other storage requirements can be customized)

● Storage: 0/32/64GB, eMMC (other storage requirements can be customized)

● Ethernet: Gigabit network port*1, supports 10/100/1000Mbps data transmission rate; RGMI interface*1, supports 10/100/1000Mbps data transmission rate, can be connected to our RGMII Gigabit Ethernet module

● HDMI: HDMI2.1 output*1, supports multi-screen display with other screens, maximum resolution 4K@120fps

● MIPI-DSI: MIPI screen interface * 1, can be plugged into Wildfire MIPI screen, supports multiple screens with other screens, single MIPI mode with the highest resolution of 2560 * 1600 @ 60fps

● MIPI-CSI: 2 * 15Pin BTB camera interface * 5 (front * 1, back * 4), can be plugged into our MIPI camera

● USB2.0: Type-A interface * 3 (HOST)

● USB3.0: Type-A interface * 1 (HOST); Type-C interface * 1 (OTG), for firmware burning interface, supports DP protocol, can be used with other screens

● PCle interface: Mini-PCle interface, can be used with full-height or half-height WIFI network card, 4G module or other Mini-PCle interface module

● SIM+TF card holder: can insert SIM card and Micro SD (TF) card at the same time, support TF card to start the system, up to 512GB, SIM card function needs to be used with 4G module

● 40Pin interface: Compatible with Raspberry Pi 40Pin interface, supports PWM/GPIO/C/SPI/UART functions

● Debug serial port: default parameter 1500000-8-N-1

● Audio: MICIN*1, capacitor microphone; headphone output + microphone input 2-in-1 interface*1

● Buttons: Power button*1; MaskRom button*1; Recovery button*1

● LED: Power indicator*1; System indicator*1

● Infrared receiver: Supports infrared remote control function

● RTC: RTC power socket*1

● Fan interface: Supports installation of 5V fan for cooling